| |
CAUSE
|
REMEDY |
| A |
Insufficient drying time. |
Allow longer air-drying. |
|
B |
Too heavy a coat. |
Apply lighter coats. |
| C |
Slow drying or poor drying conditions. |
See reference to non-drying or poor drying. |
|
D |
Improper coating selection. |
Check with your coatings supplier for proper
selection. |
| E |
Improper catalyzation. |
Check with your coatings supplier for proper
catalyst amount. |
|
F |
Catalyzed material past pot life. |
Follow manufacturer's recommended time for pot
life. |
| G |
Catalyzed material dried in a cold area, less
than 70"F (cold cure). |
Make sure drying area is 70"F. |
