|
| |
|
Changes
in Luster During Application
|
| |
CAUSE
|
REMEDY |
| A |
After several hours of application, the material
will dry to a lower luster than when the application started. |
Stir material thoroughly at the start of the job
being sure all flatting agent is well distributed. Thoroughly stir low
solids products and stains before and during the application process. |
|
Note: The more coats applied to a piece, the
smoother the finish will be. The smoother the finish is, the glossier
the finish will look, optically, due to light reflectance. |
|
