| |
CAUSE
|
REMEDY |
| A |
Not triggering the gun at each stroke. |
It should be a habit to release trigger after
every stroke. |
|
B |
Gun held at wrong angle to surface. |
Hold gun at right angle to surface. |
|
C |
Gun held too far from surface. |
Work gun 6 to 10 inches from surface. |
|
D |
Wrong air cap or fluid tip. |
Use correct combination. |
|
E |
Depositing material film of irregular thickness. |
Learn to calculate depth of wet finish film.
|
|
F |
Air pressure too high. |
Use least amount of air necessary. |
|
G |
Fluid pressure too high. |
Reduce pressure. |
