| |
CAUSE
|
REMEDY |
| A |
Dirty air cap and fluid tip. |
Remove cap and fluid tip then clean. |
| B |
Failure to overlap strokes correctly or
sufficiently. |
Follow previous stroke. |
| C |
Gun moved too quickly across surface. |
Take deliberate, slow strokes. |
| D |
Gun held at wrong angle to surface. |
Work gun at right angles to surface. |
| E |
Gun held too far from surface. |
Stroke
6 to 10 inches from surface.
|
| F |
Air pressure too high. |
Use least amount of air pressure necessary. |
| G |
Split spray |
Reduce air adjustment or change air cap. |
| H |
Tipping gun |
Spray pattern should strike surface at right
angles. |
