| |
CAUSE
|
REMEDY |
| A |
Fluid tip not tightened to spray gun. |
Tighten securely, using a good gasket. |
|
B |
Leaky connection on fluid tube or fluid needle
packing (suction gun). |
Tighten connections and lubricate packing.
|
|
C |
Lack of sufficient material in container. |
Refill container with material. |
|
D |
Tipping container at an acute angle. |
If container must be tipped, change position of
fluid tube and keep container filled with material. |
|
E |
Obstructed fluid passageway. |
Remove fluid tip, needle and fluid tube then
clean. |
|
F |
Material too heavy (suction feed). |
Thin material. |
|
G |
Clogged air vent in cup lid (suction feed). |
Clean. |
|
H |
Dirty or damaged coupling nut on cup lid (suction
feed). |
Clean or replace. |
|
I |
Fluid pipe not tightened to pressure tank or
pressure cup cover. |
Tighten and check for defective threads. |
