| |
CAUSE
|
REMEDY |
| A |
Insufficient reduction.
|
Reduce according to instructions |
|
B |
Use of solvents with high evaporation rates. |
If fast evaporation is due to local weather
conditions, choose a slower evaporating solvent than originally
recommended. |
| C |
Improper atomization of spray gun. |
Adjust spray equipment. |
|
D |
Application of too thin a film. |
Apply more material to surface. |
| E |
Draft condition. |
Find reducing solvent or blend to provide proper
flow in a draft or eliminate the draft. |
