Twitter Icon Facebook Icon Instagram Icon Linkedin Icon Pinterest Icon YouTube Icon
Previous  Up  Next" 
Amerock BP29303-G10 Atherly Collection Pull - 128mm - Satin Nickel 
An elegant profile and delicate beading highlight simple sophistication within the Atherly collection.
The Amerock BP29303G10 Atherly Pull is Finished in Satin Nickel.

Product Specifications:
Product Type: Pull
Width: 3/8 inches (10mm)
Length: 6 1/4 inches (159mm)
Center to Center: 5 1/16 inches (128mm)
Projection: 1 3/8 inches (35mm)
Material: Zinc
Finish: Satin Nickel
Hardware Included: Screw Size(s): #8-32 x 1 inch Length T.H. Machine Screw

Installation Instructions from Amerock:

Step 1: Location of Cabinet Hardware
While there are no hard, fast rules for placement of a knob or pull on a cabinet door, most cabinet makers will locate them approximately 3"-4" above the upper non-hinged corner on base cabinets, or the lower non-hinged corner on wall cabinets. However, the decision is your to make!
Step 2: Mounting Cabinet Hardware
When drilling for a knob or pull, a 3/16" hole is recommended for most styles. The exception is pulls that have "studs". A stud is simply an extension of the molded screw holes. If a pull has a stud, then a 1/4" hole is required with studs sitting securely in the wood.For choosing the right size pull, determine length by measuring from hole to hole, not by length of the pull itself.

Important Screw Information:
Amerock® includes 8-32 x 1" long machine screws with most knobs and pulls because the typical cabinet door or drawer front is 3/4" thick. This screw length should work in most applications. However, if your cabinet doors or drawer fronts are thicker than 3/4", then you will need to use longer screws for mounting. Check the thickness of both a cabinet door and a drawer front in your kitchen, as the thickness dimensions may not be the same. In general, the screw length(s) used should be 1/4" longer than the thickness of your cabinet door or drawer front material. It is not uncommon for some drawers to be constructed with a 3/4" thick front attached to a 3/4" thick drawer box. In this situation, the total drawer thickness is 1-1/2", making a 1-3/4" long screw necessary for mounting.

About Amerock:

Since 1929, Amerock® Hardware has set out to offer decorative hardware solutions that inspire, coordinate and help express personal style throughout the home. Amerock offers a complete line of decorative and functional cabinet hardware, bath hardware, hook and rail and wall plates. Amerock’s award-winning decorative and functional hardware solutions have built the company’s reputation for chic design accessories that inspire homeowners to express their personal style. Available in a variety of finishes and styles, Amerock offers high quality designs at affordable prices.
Today, Amerock is a part of The Piedmont Hardware Group and is headquartered in Mooresville, North Carolina. Our brand focus is to continue to offer outstanding quality, exceptional customer service and innovative design solutions.
In Stock

Price: $7.93